Smaller footprint than BM29 / BM55 / OK-402G: BB0136 0.3mm ultra-short BTB for AR glasses and wearables
12PIN footprint 5.96mm2 — smaller than BM55 (6.075mm2) and BM29 (6.315mm2). 1.5mm narrow body, 0.50mm mating height, 2-24PIN, 3A power pins, Insert Molding and multi-contact mating feel. A preferred small-footprint BTB for smart glasses and watches.

In the narrow boards of AR glasses and smartwatches, connector footprint often decides whether the main board fits into the temple or watch body at all. BB0136 is CPT's ultra-short board-to-board connector re-engineered on the basis of BM29 / BM55 / OK-402G: 0.30mm pitch, 1.5mm narrow body, 0.50mm mating height, with a footprint smaller than both BM29 and BM55 — a preferred spec for glasses and wearables pursuing extreme miniaturisation.
Smaller footprint than BM29 / BM55 / OK-402G at the same pin count
Taking the 12PIN version as an example, the measured footprint comparison is: CPT BB0136 5.96mm2, BM55 6.075mm2, BM29 6.315mm2. BB0136 is about 1.9% smaller than BM55 and 5.6% smaller than BM29 — in a temple or watch body where every square millimetre counts, that difference directly affects whether the stack fits. Pin counts span 2 / 4 / 6 / 10 / 12 / 16 / 20 / 24PIN for flexible signal and power selection.
Two optimisation directions built on BM29 / BM55 / OK-402G
A common pain point of ultra-small BTBs is that mating force and tactile feedback drop as pin count decreases. CPT focused on two improvements: better insertion feel and an even smaller footprint. Each power pin of the BB0136 plug and receptacle uses five functional contacts, delivering 3A current together with stable insertion force and a clear mating feel, so the experience does not degrade with fewer pins.
Features: Insert Molding + metal shielding + blind-mate guidance
- Both plug and receptacle use Insert Molding for high terminal-position consistency, suited to high-volume automated placement.
- Metal shielding and centre-island protection fully wrap the plastic, giving high overall strength and resistance to damage.
- Metal guidance improves blind-mate alignment and resistance to damage, fitting the hidden-interface assembly of glasses and watches.
- Thin profile with power capability: 0.3A signal pins, 3A power pins with dedicated high-current channels at both ends.
Electrical and reliability ratings
- Rated voltage 50V AC; dielectric withstand 100V AC / 1 min (150V AC / 1 min per the 2D drawing).
- Contact resistance: 50mOhm Max signal, 20-30mOhm Max power.
- Insulation resistance 100MOhm Min; durability 30 cycles; salt spray 48H.
- Operating temperature -55 C to +85 C, reflow-solder compatible.
Smart glasses: already volume-adopted by RayNeo, IO and others
Ultra-short small-footprint BTBs are a mature choice for AR glasses, with RayNeo, IO and others using this class of connector in volume. Board space inside a temple is extremely limited — battery, SoC, optical engine and antenna interface crowd a narrow board. A 0.4mm pitch dual-row connector exceeds the width budget, while BB0136 at 0.30mm pitch and 1.5mm width completes signal and power interconnection in a smaller footprint, leaving more room for the optical engine and battery.

Selection and functional replacement (not pad-compatible)
One point to be explicit about: BB0136 is a functional alternative to BM29 / BM55 / OK-402G, not a pad-compatible or drop-in part — the land pattern, outline and mating-height definition differ, so it cannot be substituted without a PCB redesign. What it delivers is a smaller footprint at the same pin count: 12PIN measures only 5.96mm2, below BM55 at 6.075mm2 and BM29 at 6.315mm2, freeing board space in space-critical glasses temples and watch bodies. Lay out the pads and check the stack against the BB0136 datasheet. Datasheets, 2D drawings and 3D models cover the full 2-24PIN range; contact us for samples or a functional-alternative selection review.
Related product documents
BB0136 Series · 0.3mm Ultra-short BTB (Smaller Footprint · Functional Alternative to BM29/BM55/OK-402G)
Precision BTB · pitch 0.30mm
Send us your stack-up requirement
Share board thickness, available height, channel count and operating environment and we will recommend and quote within 24 hours.
