SMA-RF Cable
RF jumper cable between an SMA jack and an IPEX/U.FL board receptacle: a panel-mount RP SMA jack with hex flange, waterproof O-ring and nut on one end, an IPEX plug on the other, linking the antenna to the main board. 50 ohm, 0-6GHz, 100+/-2mm, for routers, robotic equipment and robotic mowers.
Typical applications: antenna-to-main-board RF jumpers in routers, robotic equipment and robotic mowers
3D models / 2D drawings are downloadable per part number under “All models in this series” below.
Specifications
| Impedance | 50 ohm |
|---|---|
| Frequency | 0 - 6GHz |
| VSWR | 2.0 max |
| Cable length | 100 +/- 2mm |
| Interfaces | RP SMA JACK to IPEX 1st / 4th gen |
| Cable | RF-1.13 / RF-0.81 black coax |
| Mounting thread | 1/4"-36UNS-2A, hex flange HT2.00 |
| Sealing / compliance | O-ring D1.4-D10.0mm, heat-shrink tube D2.00x8.0mm; 96H salt spray; RoHS 2.0 / lead-free |
All models in this series
2 models in total — filter with the search box below.
| CPTGR Part No. | Description | Cross-reference P/N | Downloads |
|---|---|---|---|
| RF0227R02A | 1st-gen IPEX to SMA, heat-shrink sleeve, L=100mm; RF-1.13 black coax; RP SMA JACK for RF-113, gold-plated copper alloy | — | PDFdatasheet 3D3D |
| RF0228R02A | 4th-gen IPEX to SMA, heat-shrink sleeve, L=100mm; RF-0.81 black coax; RP SMA JACK for RF-081, gold-plated copper alloy | — | PDFdatasheet 3D3D |
Other series in this line
RF adapters
N-type and SMA inter-series adapters covering N-N, N-SMA and SMA-SMA combinations, DC–8GHz.
Attenuator
SMA and N-type attenuators, 3 / 6 / 10 / 20dB, 2W (SMA) and 25W (N), DC–8GHz.
Load
SMA and N-type matching loads, 2W and 25W respectively, for port matching and absorption in RF chains.
Circulators / Isolators
SMA female circulators and isolators covering 0.7–1GHz, 1–2GHz and 2–4GHz, for one-way signal transmission and isolation in RF front ends.
Coupler
N female coupler, 0.6–2.7GHz, 20dB coupling, for signal sampling and monitoring.
Send us your stack-up requirement
Share board thickness, available height, channel count and operating environment and we will recommend and quote within 24 hours.